BEEPROG+ (electronic component)

BEEPROG+ (electronic component)

Inquire Now

Description:

AlgOR (Algorithm On Request) service gives the user a tool to influence amount and types of programmed devices as needed.
Advanced design of the BeeProg+ programmer, including protective circuits, original brand components, and careful manufacturing and burning allows us to provide a three-year warranty on parts and labor for the programmer (limited 25 000-cycle warranty on ZIF sockets).
SpecificationHARDWAREBase unit, DACs
* USB 2.0 port
* FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate
* on-board intelligence: powerful microprocessor and FPGA based state machine
three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
* VCCP range 0..8V/1A
* VPP1, VPP2 range 0..26V/1A
* autocalibration
* selftest capability
* protection against surge and ESD on power supply input, parallel port connection
ZIF socket, pindriver
* 48-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 48-pin
* pindrivers: 48 universal
* VCCP/VPP1/VPP2 can be connected to each pin
* perfect ground for each pin
* FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins
* analog pindriver output level selectable from 1.8 V up to 26V
* current limitation, overcurrent shutdown, power failure shutdown
* ESD protection on each pin of socket (IEC1000-4-2: 15kV air, 8kV contact)
* continuity test: each pin is tested before every programming operation
* ISP connector
* 10-pin male type with missinsertion lock
* 5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices.
* 1x VCCP voltage (range 2V..7V/100mA), can be applied to pins 1, 3
* programmed chip voltage (VCCP) with both source/sink capability and voltage sense
* 1x VPP voltage (range 2V..25V/50mA), can be applied to pins 2,3,4,6,8,10
* target system supply voltage (range 2V..6V/250mA)
DEVICE SUPPORTProgrammer, in ZIF socket
* EPROM: NMOS/CMOS, 2708*, 27xxx and 27Cxxx series, with 8/16 bit data width, full support for LV series
* EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width
* Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, from 256Kbit to 32Mbit, with 8/16 bit data width, full support for LV series
* Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 45Dxxx, 59Cxxx, 25Fxxx, 25Pxxx, 85xxx, 93Cxxx, NVM3060, MDAxxx series, full support for LV series
* Configuration (EE)PROM: XCFxxx, XC17xxxx, XC18Vxxx, EPCxxx, AT17xxx, 37LVxx
* 1-Wire E(E)PROM: DS1xxx, DS2xxx
* PROM: AMD, Harris, National, Philips/Signetics, Tesla, TI
* NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x series
* PLD: Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX7000AE
* PLD: Lattice: ispGAL22V10x, ispLSI1xxx, ispLSI1xxxEA, ispLSI2xxx, ispLSI2xxxA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, LC4xxxB/C/V/ZC, M4-xx/xx, M4A3-xx/xx, M4A5-xx/xx, M4LV-xx/xx
* PLD: Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II
other PLD: SPLD/CPLD series: AMI, Atmel, AMD-Vantis, Gould, Cypress, ICT, Lattice, NS, Philips, STM, VLSI, TI
* Microcontrollers 48 series: 87x41, 87x42, 87x48, 87x49, 87x50 series
* Microcontrollers 51 series: 87xx, 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, all manufacturers, Philips LPC series
* Microcontrollers Intel 196 series: 87C196 KB/KC/KD/KT/KR/...
* Microcontrollers Atmel AVR: AT90Sxxxx, ATtiny, ATmega series
* Microcontrollers Cypress: CY8Cxxxxx
* Microcontrollers ELAN: EM78Pxxx
* Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, dsPIC series
* Microcontrollers Motorola: 68HC05, 68HC08, 68HC11 series
* Microcontrollers National: COP8xxx series
* Microcontrollers NEC: uPD78Pxxx series
* Microcontrollers Scenix (Ubicom): SXxxx series
* Microcontrollers SGS-Thomson: ST6xx, ST7xx, ST10xx series
* Microcontrollers TI: MSP430 and MSC121x series
* Microcontrollers ZILOG: Z86/Z89xxx and Z8xxx series
* Microcontrminium Product Details:



Type
OBD/OBD2 ="35%">Place of Origin
Guangdong, China H>
Furminator

Model Number
Furminator >>E>Bar

Display Color
260k color

Camera
1.3m

Place of Origin
Guangdong, China

Model Number
i68/i9

Place of Origin
Guangdong, China

Model Number
s1 h="35%">Model Number
012>

Place of Origin
Zhejiang, China

Brand Name
JX

Model Number
JX-021E>
PC1801>ODY>BODY>hejiang, China

Brand Name
morakot

Model Number
SS10 >LE>rn

Place of Origin
Jiangsu, China idth="35%">Model Number
XH-ZBW01 1996', 'OEM Service Offered Design Service Offered Buyer Label Offered', 'Above 100 People', ': China', '200120', 'http://profile.conch.cn', '',
'', 'http://conch.en.alibaba.com/', 'http://us.my.alibaba.com/mcweb/contact.htm?action=mcweb:contact_action&domain=2&id=200015143', 92
)  P!
P!
hR89', 'North America
South America
Eastern Europe
Southeast Asia
Africa
Oceania
Mid East
Eastern Asia
Western Europe
', '', '1,000-3,000 square meters', '91% - 100%', '101 - 500 People',
'\r\nNANAN SHENGJIN STONE CO.,LTD. Locate at the central area of Golden Triangle in the south of Fujian province, the China`s biggest base for stone products production, processing and export---Nan`an.,which is closely adjacent to Xiamen and Quanzhou Ports, convenient both on land and water transportation, and an ideal place for merchants to get together for business.

The company established in 1993, who mainly accepted orders from foreign trade companies and produced Japanese style monuments at the start, In 1995, the company obtained the independent right of import and export, and begined to export various stone products to overseas. The current business involved mausoleums, Japanese-style tombstone, bailey and matching products, European-American style monuments and matching products, stone artistic carvings, landscape sculptures, Buddha sculptures, granite/marble sink, and fountain ball. The annual export volume achieves 10 million US dollars.
Payment & Shipping Terms:



Minimum Order Quantity:
1 Piece/Pieces

Delivery Time:
1 day

Payment Terms:
T/T,Western Union,MoneyGram

Supply Ability:
500 Piece/Pieces per QuarterR>>T/T,Western Union,MoneyGram

Supply Ability:
1000 Set/Sets per Weekek Ability:
2000 Ton per MonthTD>TABLE> WeekE>/Pieces per DayABLE>ayLE>E>
Payment Terms:
L/C,T/T

Supply Ability:
5000 Metric Ton per MonthE>R>>ces.

Auto CAD Service:
If you need more CAD drawings or if you are still in the initial stage of your project,we can help to provide CAD designs based on the communication with you and give our advice.


Delivery and Packaging

Delivery:

The main port of shipment is the Xiamen Port, but all other ports of China are feasible, depending on the requirements of customer.

Normally 3 to 4 weeks are required for processing of order from date of receipt of order or LC for standard sizes. However, for specific size orders extra time may be required but requests for earlier delivery will be done as per request.
We can provide the \"Door to Door\" services, but our general quotation excludes the fee of land transportation in your country, the import tariff in your country, the sales tax, the commission charge and the fee of declare at customs, the dock charge in your country and the cargo handling charge. We will query these charges a\0\0\0\0\0\0\0\0
\0\0\0\0Above US$100 Million\0 Million\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\